If you made a mistake, To erase the character, To cancel labeling – Sony DHC-MD555 User Manual

Page 52: Copying a disc or track title, To cancel copying, Checking the titles, Notes

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Repeat steps 4 to 6 to complete the

entire title.

If you made a mistake

Press CURSOR or —► until the
character you want to change flashes,
then repeat steps 4 to 6.

To erase the character

Press CLEAR. Each time you press the
button, the character at the position of
the cursor is erased.
You cannot insert characters.

Press ENTER/YES to complete the

labeling procedure.

The titles you entered appear
sequentially, then the display returns to
the display in step 1.

To cancel labeling

Press I for the MD.

Copying a disc or track

title

You can copy a labeled disc or track title to
use it as a title of another track or the disc title
within a disc.

Press MENU/NO so "Edit Menu" appears.

Turn MULTI JOG until "Name ?" appears,

then press ENTER/YES.

Turn MULTI JOG until "Nm Copy ?"

appears, then press ENTER/YES.

Labeling an MD (continued)

Turn MULTI JOG to select "Disc" (when

copying the disc title) or the track number
with the title you want to copy, then press
ENTER/YES.

When *No Name"

appears

The disc or track has not been labeled.

5 Turn MULTI JOG to select the copy

destination track number or "Disc" (when
copying as the disc title), then press
ENTER/YES.

When "Overwrite ??" appears
The copy destination already has a disc or track

title. To continue and copy the title, press
ENTER/YES.

To cancel copying

Press ■ for the MD.

Checking the titles

To check the disc title, press SCROLL on the
remote while the deck is stopped. To check
the track title, press SCROLL on the remote
while in play. The title appears scrolling in
the display. To stop scrolling, press SCROLL.
Press the button again to restart scrolling.
You can also check the titles as follows.

• To check a disc title, press MD D.SKIP on

the remote repeatedly in stop mode until
the desired MD appears.

• To check a track title, turn MULTI JOG in

stop mode until the desired track number
appears.

Notes

• You can also display disc and track titles by

pressing UPPER DISPLAY, but only the first 14
characters appear. The remaining characters do
not scroll in the display.

• You can label a track title while recording, but you

must complete the labeling before the track ends.