Sony DHC-MD555 - Manual (Page 5)

Preparation
Pull the transport cartridge straight
toward you out of the MD deck.
Transport
cartridge
Keep the transport cartridge for future use.
When you move the
system, insert the cartridge into
the MD 4 slot of the MD deck in the same manner as
when you purchased the system to prevent deck
trouble (see page 82).
Note
Be sure to remove the transport cartridge before you
turn on the system.
If you turn on the system widiout taking out the
cartridge, "MD RE-INSERT!" appears. Turn off the
system, then take out the cartridge.
I Connect the speakers.
Position the speakers so that the SONY
logo is on die inside. Viewed from the
front of the system, connect the speaker
on the left side to the SPEAKER L
terminals, ana the speaker on the right
side to the SPEAKER R terminals.
"SONY" logo
1 Cormect the speaker cords to the
SPEAKER terminals of the same
color.
Gray* (®)
Black* (G)
' The color of your sp>eaker cords might be
different. See the manual provided with
your speaker system for details (except for
the tourist model).
Z Pull gently on the speaker cord to
make sure it is connected correctly.
If the speaker cord pulls out, connect
it again.
Q
(b
3
to
t/t
fil
a
Notes
• Keep the speaker cords away from the antennas to
prevent noise during radio reception.
• If you reverse the right and left speaker
connections or the speaker positions, the sound
may be strange.
continued