Tomei Powered TITANIUM CAT STRAIGHT PIPE NISSAN TYPE-A - Manual (Page 5)

KIT CONTENTS Below is the contents of this kit with the quantity listed in brackets ().
REQUIRED TOOLS
These tools are the bare minimum required for the job.
* General Engine Maintenance Tools * Torque Wrench * Service Manual
Decat Straight Pipe （1）
Gasket (2)
Flange Bolt
M10 x P=1.25 (4)
Bolt Smooth Paste (1) EXPREME Ti Sticker (2)
Nut
M10 x P=1.25 (4)
Cable Tie (1)
CAUTION
■ This product is designed to be used for off road competition purposes only.
■ This product is to be installed by a qualified professional in a fully equipped workshop.
■ This product was designed specifically for the application specified. If the attempt was made to
use this product on another engine/car other than specified then you will risk damaging this kit
and or the engine or components related with it.
■ This product is to be installed with the appropriate tools and equipment to prevent any engine
failures and injuries or bodily harm.
WARNING
■ This product is to be installed when the engine and engine bay is cold.
■ Please be sure that all parts are fitted correctly to avoid any possible fire risk hazards.
1．REMOVAL OF THE STOCK CATALYTIC CONVERTER
This manual only provides the simple instructions. For more details please refer to the
vehicles official service manual.
1. Disconnect the cars battery negative terminal.
2. Remove the stock catalytic converter.
* General Engine Maintenance Tools * Torque Wrench * Service Manual
5