Tomei Powered TURBO OUTLET - Manual (Page 5)

KIT CONTENTS
Please check that your kit contains the following parts and quantity is shown in
REQUIRED TOOLS
These are the required tools for the installation.
・General Maintenance Tools Outlet Gasket (Turbine Side) x1
※This part is not included in the kit.
・Torque Wrench This will need to be sourced
Outlet Pipe(1)
Outlet Gasket
(Front Pipe Side)(1)
Stud Bolt （3） Spring Washer（3） Nut（3）
O2 Sensor Adapter（1） Bolt Smooth Paste（1）
Copper Washer
φ16-22（1）
Only included
423001 Extra parts included 423002
Blind Plug For
EAI Control （1）
Hose Band（1）
Hexagon bolt（3）
Torque Wrench This will need to be sourced
seperatly for the installation.
CAUTION
■This product was designed for competition use ONLY and is for off road use only.
■This product is designed for competition use so it must be installed by an experienced qualified
professional with the correct equipment in an appropriate equipped workshop.
■ This product was designed specifically for the engine specified. If the attempt was made to use
this product(s) on another engine other than specified then you will risk of damaging the related
parts in this kit and/or the engine that it is used with.
■ Do not use brute force when removing and installing parts to avoid any unwanted breakages.
■ This product was designed specifically for the engine specified. If the attempt was made to use
this product(s) on another engine other than specified then you will risk of
damaging the related parts in this kit and/or the engine that it is used with.
CAUTION!
■ This product is to be installed when the engine is cold and in a safe environment.
■ Check that all parts are fitted in the right places and fitted correctly to avoid any fire hazards.
5