Tomei Powered TURBO OUTLET (DOWN PIPES) - Manual (Page 7)

2. OUTLET REMOVAL & INSTALLATION.
(REMOVING THE STOCK OUTLET)
Unbolt the stock front pipe.
Remove the stock O2 sensor from the outlet pipe.
Remove the outlet pipe.
(INSTALL THE TOMEI OUTLET)
①
※
⑥
※
※
※
[EXPLODED VIEW]
※
※
①
3. INSTALLATION VERIFICATION.
1. Check if there is no interference such as wiring around parts they come back and outlets.
2. Start the engine and check that there are no exhaust leaks.
7
②
③
④
⑤
③
④
⑤
③
④
⑤
※
Re‐use stock
⑥ Use an adapter for the O2 sensor if required.
[TORQUE SPECS]
The clamping portion, please apply the bolt smooth
paste that comes to prevent sticking or burning.
① Outlet Gasket (Turbo Side)
② Outlet Gasket (Front Pipe Side)
③ Stud Bolt
④ Washer
⑤ Nut
⑥ O2 Adapter
※ 27 N・ｍ （2.8 kgf・ｍ）
⑤ 60 N・m (6.1 kgf・m)
⑥ 50 N・m (5.1 kgf・m)