Removal of the standard turbine, Installation 1 – Tomei Powered ARMS M7960 User Manual

Page 11

Text mode
Original mode

REMOVAL OF THE STANDARD TURBINE

Disconnect the battery’s negative terminal and refer to the service manual for the removal of the standard turbine.
The items marked with an "X" next to them in the below illustration will no longer be required.

INSTALLATION 1

Fitting the stud bolt onto the Turbine.

Short

Long

※

The short side is for the turbo side.

※

Installation requires the double nut setup

to be used.
※

Please check for any movement after the

double nut has been fitted.

STUD BOLT INSTALLATION