Caution – Tomei Powered ARMS M7960 User Manual

Page 10

CAUTION

■

This manual will only provide the information about this Turbo products installation process. For

additional information on disassembly, assembly for other parts and the water cooling etc please
refer to the Mitsubishi service manual.

■

This product is designed to be used for off road competition purposes. This product may not be road

legal in your country so please check with your local authorities prior to use on general public roads.

■

This product will increase your engines power output so it is necessary to address and upgrade suit

your suspension and brakes to the increased power for added safety.

■

This product was specifically designed for the vehicle application as stated above. This is

not designed and may not be suitable for other cars/engines other than stated in this manual.

If this product/kit is installed on any other vehicles/engines it may damage this product and

/or the engine /vehicle that it is fitted to.

■

This installation manual simply explains the removal and installation of the turbo unit as well as

the air pipe(s), heat shield and the coolant as well. Please read this manual carefully

in advance to prepare all the necessary tools required for the job.

■

This product is to be fitted by an experienced professional in a fully equipped workshop.

■

Protective equipment may be required for the installation process so please ensure

there is the appropriate safety and 1st aid equipment readily available for the installation.

■

It is best to work on the car when the engine is cold as it will prevent possible burns and

or injuries when the engine is hot.

■

When removing and re-fitting the parts please perform the job with care. Do not use excessive

force on the bolts and parts so as not to cause any damages to the parts and/or related parts.

■

Please tighten each bolt with a torque wrench.

This will prevent any possible damages to the bolt and also ensure that it won’t come undone.

■

Prior to testing the car please check for adequate levels of coolant and any signs of leakage.

If there are signs of lack of coolant, leaks and/or rapid rising of temperature stop the car
immediately so as not to risk engine damage.

■

Have a boost gauge fitted to your car (if not already) to monitor the turbo via the boost levels

to ensure that it is operating as normal.