Tomei Powered BAFFLE STIFFENER - Manual (Page 4)

KIT CONTENTS
Below is the contents of this kit and the quantity in brackets ( ).
REQUIRED TOOLS
Below are the minimal tools required for the installation.
・General Engine Maintenance Tools ・Silicon Gasket
・Torque Wrench ・OEM O-Ring Oil Strainer
CAUTION!
BAFFLE (1) STIFFNER (1)
O-RING (1) BOLT M6×16 (17)
M6×20 (2)
M6×30 (1)
CAUTION!
■ This product is designed to be used for off road competition purposes.This product may not be road
legal in your country so please check with your local authorities prior to use on general public roads.
■ This product is to be fitted by an experienced professional in a fully equipped workshop.
■ This product was designed specifically for the engine specified. If the attempt was made to use this product's)
on another engine other than specified then you will risk of damaging the related parts in this kit and/or
the engine that it is used with.
■ If the incorrect tools are used then you risk possible injury or damage to the equipment, product(s)
hazards and or vehicle. Please always work in a safe environment to avoid any health and/or safety.
WARNING!
■ The installation should be done when the engine and engine bay is cold.
■ Always check that all required parts are fitted before starting the car to avoid any fire & safety risks.
■ Please wash and clean this product throughly prior to installation.
If the product has not been washed properly, foreign materials that might be left during
the production process may case internal damage to the engine.
4