Tomei Powered OVERSIZED OIL PAN - Manual (Page 4)

KIT CONTENTS
Below is the contents of this kit with the quantity listed in brackets ().
REQUIRED TOOLS
These tools are the bare minimum required for the job.
・General Maintenance Tools. ・Nissan Workshop Service Manual
・Torque Wrench ・Radiator Coolant (LLC)
CAUTION
■ This product has been designed for competition use only and is not to be used on any public roads.
■ This product was not designed to be used on a street going vehicle. If used on a street driven car you may be
penalized by law.
■ This product is designed for competition use so it must be installed by an experienced qualified professional
with the correct equipment in an appropriate equipped workshop.
■ This product was designed specifically for the engine specified. If the attempt was made to use this product on
another engine other than specified. Then you'll risk damaging the related parts in this kit and/or the engine
that it is used with.
■ Please tighten each bolt with a torque wrench. This will prevent any possible damages to the bolt and also
ensure that it won’t come undone.
■ Please check all tightened bolts, nuts, screws consistently to ensure nothing is left loose.
■ When removing and re-fitting the parts please perform the job with care. Do not use excessive force on the
bolts and parts so as not to cause any damages to the parts and/or related parts.
■ The correct tools and equipment must be used when removing and installing any part on the car. This is to
minimize any chances of injury.
■ Check that there is adequate amount of oil in the engine and also check for any signs of oil leak before
driving. When there is insufficient amount of oil in the engine, the engine will be damaged.
WARNING
■ It is best to work on the car when the engine is cold as it will prevent possible burns and or injuries when the
engine is hot.
■ Check that all parts have been fitted and installed correctly. If there is anything missing then there will be a
high chance of fire risk.
Oil Pan (1)
Stud Bolt M6 (4)
Nut M6 (4)
Spring Washer M6 (10)
6Point Head Bolt M6 (6)
Drain Plug (1)
Drain Plug Washer (1)
1/8 Taped Screw Plug (1)
4