Tomei Powered SOLID PIVOTS - Manual (Page 6)

CAUTION
■ This product was designed for competition use ONLY, for use on closed circuits.
■ This product has been designed for competition use only and is not to be used on any public roads.
■ This product is to be fitted by an experienced professional in a fully equipped workshop.
■ This product was specifically designed for the vehicle application as stated above. This is not designed for u
and may not be suitable for other cars/engines other than stated in this manual. If this product/kit is installe
on any other vehicles/engines, it may damage this product and/or the engine/vehicle that it is fitted to.
■ This product is to be fitted with the correct tools, protective & safety equipement. Failure to do so, can lead
to possible work and health hazards.
■ This Solid Pivot Kit (Shim adjustment system) is designed to be used with the Solid Type Camshafts
(sold seperately).
■ Please change the valve springs to suit the appropriate camshafts to suit this application.
WARNING
■ This product is to be installed when the engine and engine bay is cold.
■ Please be sure that all parts are fitted correctly to avoid any possible fire risk hazards.
KIT CONTENTS REQUIRED TOOLS
Below is the contents of this kit with the quantity The following tools are recommended
listed in brackets (). for the installation process.
・General Maintenance Tools
・Official Service Manual.
when made available>
Valve Lifter Set
※Ｍｉｔｓｕｂｉｓｈｉ
Ｓｐｅｃｉａｌ Ｔｏｏｌ
MD998782
SOLID PIVOT（16）
TEST SHIM（8）