beautypg.com

Wiring (cont’d.) accessories, Adjustable damper and duct adaptor – Qmark MSDH - High Temperature Electric Blower Heaters User Manual

Page 3

background image

3

WIRING (cont’d.)

ACCESSORIES

Temperature Rise vs Duct Length

30 kW

100

75

50

25

0

0

100

75

50

25

125

150

175

Duct Length in Feet

Temperature Rise ˚F

1500

RPM

1800

RPM

2200

RPM

Temperature Rise vs Duct Length

48 kW

100

60

40

20

0

0

100

75

50

25

125

150

175

Duct Length in Feet

Temperature Rise ˚F

120

140

160

1800

RPM

2200

RPM

1500

RPM

80

Temperature Rise vs Duct Length

60 kW

100

60
40

20

0

0

100

75

50

25

125

150

175

Duct Length in Feet

Temperature Rise ˚F

120

140

160

1800

RPM

2200

RPM

1500

RPM

80

180

200

SDH heaters can be easily field if modified to vary the fan speed.

There may be some circumstances where the use of short lengths of
duct may not create sufficient pressure drop to achieve the desired tem-
perature rise. This may also be the case of using the unit without a duct.
This insufficient static pressure drop may result in high air flow, with
the maximum temperature rise below the desired level, (even after the
fan speed has been reduced to the minimum rpm). An accessory
SDHAD, adjustable damper, is available and can be attached to the
heater to produce a static load, ranging from .1” to .19” H

2

O which will

act to reduce the amount of air flow.

The “Friction Loss” Graph 4 provides the actual test data on the

friction loss for the ADHAD damper attachment. The losses are stated
as the equivalent length in feet of 20” duct.

Friction Loss SDHAD Damper

10

60

40

20

0

2000

1600

1400

1800

2200

2400

Fan RPM

Equivalent Duct Length FT

30

50

70

80

90

Damper Full Closed

Damper Full Open

The SDH Dragon includes 2 thermostats. The thermostat on the air

inlet end of the unit is for the minimum air temperature desired. The
thermostat on the discharge end of the heater is for the maximum air
temperature desired. The two thermostats are wired in series with the
heating element contactor coil. The temperature range of both ther-
mostats is 60 - 180˚F.

Adjustable Damper and Duct Adaptor

Rear of

Heater

Front of

Heater

Adjustable

Damper

1/4-20 Wing nut

Provided with

SDHAD

Duct

Adapter