Checking the leds, Figure 3-26 – Cisco IP/TV 3400 Series User Manual
Page 97

3-35
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Chapter 3 Installing the IP/TV Server
Checking the LEDs
Figure 3-26 Optibase MovieMaker 200S Networker Video Capture
Card—Connecting to the Video Source
Step 2
Connect the other end of the video BNC connector cable or the S-video mini-DIN
cable to the appropriate ports on the video source device.
Step 3
Plug the audio connector cable from the video source device to the A IN port
(labeled 5 in
) on the video capture card.
Checking the LEDs
When the IP/TV Server is up and running, observe the front and back panel LEDs
to verify that your system is operating properly. (See
,
, and
,
, and
1
S-video port
2
Video in port
3
Video out port
4
Audio out port
5
Audio in port
96404
S-VIDEO
V IN
V OUT
A OUT
A IN
1
2
3
4
5