Installing the chassis in a rack – Cisco IP/TV 3400 Series User Manual
Page 68
Chapter 3 Installing the IP/TV Server
Installing Cisco IP/TV 3425 and 3425A Server Units
3-6
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Figure 3-5
Bracket Orientation for a 23-Inch (58.42-cm) Rack
Installing the Chassis in a Rack
After you secure the brackets to the chassis, rack-mount the chassis by securing
the brackets to two posts or mounting strips in the rack. (See
.) You
need two people to install the chassis in the rack—one person to hold the chassis
and one person to secure it to the rack.
Figure 3-6
Installing the Chassis in the Rack
The inlet and exhaust ports for cooling air are located in the front and rear of the
chassis, respectively; therefore, multiple IP/TV Servers can be stacked with little
or no vertical clearance.
44747
DRIVE 1
Content Engine 590
Front
Rear
44215
Front
Rear
Note: The second bracket attaches to the other side of the chassis.