beautypg.com

Hot-plug hard drive, Hot-plug hard drive -21 – Compaq PROLIANT ML350 User Manual

Page 35

background image

Removal and Replacement Procedures

Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide

2-21

COMPAQ CONFIDENTIAL Codename: Steel Dragon 2.4 Part Number: 278704-002 Last Saved On: 12/18/02 9:43 AM

Hot-Plug Hard Drive

NOTE: The server does not need to be powered off to complete this operation.

To remove a hot-plug hard drive:

1. Open the bezel door. Refer to “Bezel Door” earlier in this chapter.

2. Slide the hard drive release latch (1) to open the ejector lever (2).

3. Pull the hot-plug hard drive out of the drive bay.

1

2

Figure 2-18: Removing a hot-plug hard drive

To replace a hot-plug hard drive, push the drive back into the bay and then close the ejector
lever to fully seat the drive.

See also other documents in the category Compaq Computers: