Cradlepoint WIPIPE CBA750 - Manual (Page 58)

CRADLEPOINT
CBA750 | USER MANUAL Firmware ver. 1.9.0
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 56
6.6 SNMP
The SNMP Settings section allows you to enable or
disable the SNMP protocol over the LAN, WAN, or
VLAN interfaces. For security, you can also set the
community names for both Get and Set SNMP
requests.
SNMP is disabled by default on all three interfaces.
The Default Port is 161.