Cradlepoint WIPIPE CBA750 User Manual

Page 44

CRADLEPOINT

CBA750| USER MANUAL Firmware ver. 1.9.0

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 42

o MSCHAPv2
o PAP
o CHAP



TTLS Username.



TTLS Password.



Verify TTLS Password.



TTLS Client Identity.

o Modem MAC Address (Default.)
o Custom

you select “Custom”, fill in the custom client identity field.

Dual WiMAX/3G Settings

Connect Mode. Select the preferred connection
method when using a dual WiMAX/3G modem.



Auto. Try WiMAX first then 3G (see Dual

WiMAX/3G Reconnect Policy below to
configure the conditions under which a
WiMAX connection should be reattempted if
connected 3G).



3G Only. Only connect 3G (WiMAX is

disabled).



WiMAX Only. Only connect WiMAX (3G is

disabled).

Reconnect Policy. When in Auto Connect Mode with an active 3G connection, this setting specifies under what
conditions a WiMAX connection should be reattempted. The policy can be based on current 3G data rate or on time (see
Data Rate Threshold and Duration Threshold below). Several predefined settings for Data Rate Threshold and Duration
Threshold are available for ease of configuration. Note: some dual mode modems can leave the 3G connection active
while attempting the WiMAX connection. Others must disconnect the 3G connection first.