Cisco Cisco Small Business Pro IP Phones SPA 525G User Manual

Page 100

Using the Cisco SPA 500S Attendant Console

Connecting the Cisco SPA 500S Attendant Console to the Cisco SPA 525G IP Phone

Cisco Small Business Pro IP Phone SPA 525G User Guide

STEP 4

Using the attachment arm screw, secure the attachment arm to the first Cisco SPA
500S.

STEP 5

Insert the pegs on the attachment arm into the peg holes on the Cisco SPA 500S.

STEP 6

Using the attachment arm screw, secure the attachment arm to the second Cisco
SPA 500S.

CAUTION

Do not plug a telephone line cord into the AUX port. Use only the auxiliary cable
provided with the Cisco SPA 500S.

STEP 7

Locate the AUX OUT port on the back of the first Cisco SPA 500S. Connect one
end of the auxiliary cable to this port.

STEP 8

Locate the AUX IN port on the back of the second Cisco SPA 500S. Connect the
other end of the auxiliary cable to this port.

STEP 9

Route the auxiliary cable inside the cable slot. The Cisco SPA 500S is powered by
the auxiliary cable with the Cisco SPA 525G; no additional power source is
required.

STEP 10

Attach the appropriate desktop stands to each unit.