Snmp setup, Ntp setup – Compex Systems 802.11N User Manual
Page 56
SNMP Setup
Enable SNMP:
Default is disabled. Check on box to enable.
Read Only Password:
Password to query device.
Engine
ID:
Default is
Enable
SNMP
Trap:
Default is disabled. Check on box to enable.
Trap Destination IP:
Enter the IP to send the info when trap is triggered.
Community:
Enter the SNMP community string.
NTP Setup
Enable NTP Client:
Default is disabled. Check on box to enable.
Select
Your
Time
Zone:
Select from list the country you reside.
Custom Time Server:
Default is “time.nist.gov“ Enter preferred time server domain or IP
Known Time Server:
You can also select one from this list as your new time server.
Web HTTP Security
Web Server Mode:
Default is HTTP. Option is HTTP and HTTPs
HTTP(s)
Port:
Default is 80 for HTTP and 413 for HTTPs.
Enter
a
new
preferred
port
number.