Compex Systems 802.11N - Manual (Page 35)

Access Point Parameters Settings
Fig 2.3 Basic Wireless Settings (Access Point/ Access Point WDS)
Local AP-ESSID
This is the Service Set Identifier used to identify the operator’s wireless LAN. It should be
specified while operating in Access Point or Access Point WDS mode.
All the client devices within its range will receive broadcast messages from the access point
advertising this SSID.
Hide SSID:
Once checked, this will disable advertising the SSID of the access point in broadcast
messages to wireless stations. This option is only available in Access Point, Access Point
WDS and Repeater WDS mode only.
Country Code
Different countries have different power levels and also frequency selections. To ensure
device operation follows regulatory compliance rules, the operator should make sure that
correct country code where device will be used, is selected. The channel list, output power
limits, IEEE 802.11 and Channel Spectrum Width modes will be tuned according to the
regulations of the selected country.
No Country Set:
Option when checked, only the frequency range are available.
11n 2.4GHz is 2412-2462MHz, 11n 5GHz is 5180-5320MHz and 5745-5825MHz.
Wireless Profile:
NA is 11n 5GHz band and represents a mixed of 802.11n and 802.11a mode.
NG is 11n 2.4GHz band and represents a mixed of 802.11n, 802.11g and 802.11b mod e.