Compex Systems 802.11N - Manual (Page 14)

Device Panel Views and Descriptions
Features Status and Indications
1 POWER LED
Static ON: Power is being supplied to the device.
Off: Power is not being supplied to the device.
3 DIAGNOSTIC
LED
Flashing: During power-up. Goes OFF after device is up.
2
3
4
5
SIGNAL
STRENGTH
LEVEL
INDICATOR
(low) (higher low) (lower high) (high)
LED10 LED20 LED30 LED40
6 ETHERNET LINK
LED
Steady ON: Link is established between device and the network.
OFF: Ethernet port is not connected.
7 ETHERNET
PORT
10/100Mbps Ethernet port and
PoE power Input (range 12V to 24V DC)
8
SURGE
ARRESTOR
Connect ground wire to earth point.
9
RESET BUTTON
• To reboot, press once and release.
• To reset password, press and hold button for 5 seconds and
release.
• To restore factory default settings, press and hold button for 8
seconds and release.
10 ANTENNA Build-in Dual Polarization high gain antenna