Compex Systems 802.11N - Manual (Page 50)

Bandwidth Control
Bandwidth Control: Default is disabled. Check on box to enable.
This control let user set a max limited bandwidth to router.
This function let use share one high speed broadband line with several
routers each limited to a maximum limited by its bandwidth control.
Download Total Rate(kbit) enter the max bandwidth limit for downloading on this router.
Upload Total Rate(kbit): enter the max bandwidth limit for uploading on this router.
Upload/Download limit can also be controlled for each user by IP or MAC address.
Name: enter short name of user. Name track the user to rule only.
Committed Rate(kbit): enter the average rate for user.
Ceiling Rate (kbit): enter the peak rate allowed for user
Rule Type: select By IP or By MAC
IP/MAC Address: enter the local IP address if rule type is By IP
enter the local PC ethernet MAC address if rule type is By MAC
Routing Information Protocol: Default is disabled. Check on box to enable.
For configuration refer to Appendix section.
Router Info Protocol version: select RIPv1 or RIPv2