Compex Systems 802.11N - Manual (Page 18)

Setup Requirements
• CAT5/5e Networking Cable.
• At least 1 computer installed with a web browser and a wired or wireless
network interface adapter.
• All network nodes installed with TCP/IP and properly configured IP address
parameters.
Mount the Unit on a Pole
Access point is designed to mount to a pole. The mounting method will be
described as shown below.
Note the following guidelines for choosing the best location for your wireless AP:
• Place the AP as close as possible to the area where users will require
access to the WLAN.
• Choose an elevated location where trees, buildings and large steel
structures will not obstruct the antenna signals and which offers maximum
line-of-sight propagation with the users.
• Select an appropriate antenna to improve range and/or coverage and
the access point also lets you fine-tune parameters such as the transmit
power to achieve the best results.