Compex Systems 802.11N - Manual (Page 12)

Router Mode
In Router Mode, the device also operates as a router.
Either the wireless or Ethernet can be setup as WAN connection to a broadband
modem. Wireless as WAN is known as Station + Router mode (or Wireless Routing Client
mode) and Ethernet as WAN is known as AP + Router mode (or Gateway mode).
Device supports several types of broadband connections Static IP, Dynamic IP and
PPPoE. For setup details refer to the respective section.
The illustration below shows the Ethernet port is setup as the WAN port and the wireless
connection as the LAN.
Station + Router connection example
Wireless is use to connect to the broadband.
Ethernet is the local network (LAN)
sharing the broadband connection.
AP + Router connection example
Ethernet is use to connect to the broadband.
Wireless is the local network (LAN)
sharing the broadband connection.
Broadband Internet Access Type:
Static IP Address
Use Static IP Address you have subscribed a fixed IP or range IP addresses from
your ISP.
Dynamic IP Address
With Dynamic IP Address the device automatically request IP address from
modem or ISP.
PPP over Ethernet (PPPoE)
When using ADSL services provided by your ISP support PPPoE connection.