Computer, see, Installing a floppy drive (desktop computer) – Dell Precision 490 User Manual
Page 72
c.
Push the vented metal insert until it clicks into place and its metal tabs rest flush against the chassis surface.
Then, install a drive-panel insert (see
Replacing a Drive-Panel Insert
).
9.
If you are installing another drive in the FlexBay, see the appropriate installation instructions in this section.
10.
Replace the desktop drive retention insert and fold down its handle.
11.
Reinstall the drive panel (see
12.
Ensure that all connectors are properly cabled and firmly seated.
13.
Replace the computer cover (see
Replacing the Computer Cover
).
14.
Connect the computer and devices to electrical outlets, and turn them on.
Installing a Floppy Drive (Desktop Computer)
1.
Follow the procedures in
Before You Begin
.
2.
Remove the computer cover (see
Removing the Computer Cover
).
3.
Remove the drive panel (see
).
4.
Pull the desktop drive retention insert by the handle and set it aside in a safe place.
1 FlexBay
2 vented metal insert
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.