Dell PowerVault DP500 - Manual (Page 20)

20
Detailed End-to-End iSCSI Setup
3 Select Automatically restore this connection when the system boots to
ensure continuous connection and to avoid establishment of
Target-Initiator association during power spike or system reboots.
4 Repeat the Log on process for each iSCSI NIC.
Figure 2-4. Log On to Target Window
For MPIO connection, you must select the Target that displays status as
Connected and select Log On. In the Log On to Target window, select
Advanced and configure redundant iSCSI Target IP address.
Persistent Targets Tab
You can configure Persistent Targets so that the connection to the Target is
automatically restored when the system reboots. If the Targets are configured
to be persistent, they appear in this Persistent Targets tab.