Dell PowerVault DP500 - Manual (Page 24)

24
Detailed End-to-End iSCSI Setup
The following steps describe the procedure to create two iSCSI Targets
that use two dedicated NICs for iSCSI traffic as shown in Figure 2-7. Each
Target is made available to a different application on the host server. The
Target in the Microsoft-based iSCSI Target solution only defines the path
that the iSCSI storage traffic uses from the iSCSI Initiator.
Figure 2-7. Microsoft iSCSI Software Target Properties
Follow the steps below to create iSCSI Targets:
a In the Microsoft iSCSI Software target Console, right-click iSCSI
Target on the left pane to launch the Create iSCSI Target Wizard.
b The Welcome to the Create iSCSI Target Wizard screen appears.
Click Next.
c The iSCSI Target identification screen appears. Enter the Target
name and Description. You can use the Browse option to view and
choose the servers/clients in the network.
The iSCSI initiators identifiers screen appears.