Dell PowerVault DP500 - Manual (Page 11)

Introduction
11
c Enter the value or choose the value through the Browse option, and
then click OK.
The IQN identifier is displayed in the Advanced Identifiers screen
and the fields IQN, DNS Domain Name, IP address, and MAC
Address are populated.
d Select the populated value and click OK.
e In the iSCSI Initiator Identifiers screen, the IQN identifier field is
populated with appropriate information. Click Advanced to view
alternate identifiers.
f Click Next.
7 The Completing the Create iSCSI Target wizard appears. Click Finish.
Verifying the Target Creation (Optional)
1 Go to the Microsoft iSCSI Software Target console. The Target name
that you entered in step 3 during the Target creation is displayed.
2 Right-click the Target name. The options Create/Delete iSCSI Target,
Create Virtual Disk, Add Existing Virtual Disk, Properties, and Help appear.
Creating a Virtual Disk
1 Right-click the newly created Target and click Create Virtual Disk for
iSCSI Target. The Create Virtual Disk wizard appears. Click Next.
2 To create a file, choose the Browse option, select a volume on the local
hard disks and type a file name with an extension .vhd.
For example, create Z:\vol1.vhd, where Z is the created volume on the
local drive and vol1.vhd is the filename. Click Next.
3 In the Size screen, choose the appropriate size from Currently available
free space and click Next.
4 The Description screen may appear. Enter the Virtual Disk description, if
required and click Next.