Dell PowerEdge 7250 - Manual (Page 51)

BMC Management Utility 49
Figure 3-13. Configuring the Serial-Over-LAN for the Remote System, Example 2
• If SOL is enabled, two BMC settings are displayed:
– The communication baud-rate between the system serial port and the BMC.
– The minimum BMC user privilege level required for activating console redirection.
SOL Proxy displays a list of valid values for each feature, as well as the current value of the
feature enclosed in a pair of brackets. You can select the number before a value to set it as the
new setting, or press to leave the BMC settings unchanged. If changes are made to
the BMC settings, you are asked to confirm your changes. The new BMC settings are then
displayed. See Figure 3-14.