Dell PowerEdge 7250 - Manual (Page 21)

Configuring Your Managed System 19
The password can be from 1 to 16 ASCII characters long. The characters accepted by the SMU for
usernames are the ASCII printable characters in the range 0x21 through 0x7e, except for left and
right bracket characters ('[' and ']'). These characters are reserved for framing packets for terminal
mode sessions.
Clear Password
This check box is used to clear the password for the user. If this box is checked, the Enter and Verify
New Password edit boxes are disabled.
Enter/Verify New Password
These edit boxes allow you to enter the password for the user. The Verify New Password edit box
ensures that the password entered in the Enter New Password edit box is correct. As a user enters a
password, asterisks are displayed. If a password already exists, these fields show ******** when you
enter this screen.
This password can be between 1 and 16 ASCII characters in length. The characters accepted by the
SMU for user passwords are the ASCII printable characters in the range 0x21 through 0x7e, except
for left and right bracket characters ([ and ]), since those characters are used for framing packets for
terminal mode sessions.
NOTE: If the Clear Password check box is checked, these two edit boxes are disabled.
If a user password is currently set, the SMU user is not required to enter the current password
before changing it.
User Privilege Level for LAN Channels
This combo box allows you to select the privilege level for LAN channel. The global privilege level
set for LAN channel access takes precedence over the user privilege level. For example, if the LAN
channel is configured for user access only, then users are limited to user operations regardless of the
user privilege level.
User Privilege Level for Serial Channel
This combo box allows you to select the privilege level for serial channel access. The privilege level
set for the serial channel takes precedence over the user privilege level. For example, if the serial
channel is configured for user access only, then users are limited to user operations regardless of the
user privilege level.
LAN Channel Configuration Subtask
The LAN channel configuration subtask allows you to modify settings related to the LAN channel.
The initial screen for configuring the LAN channel and the configuration settings are described in
Figure 2-3.