Dell Inspiron 1320 (Mid 2009) - Manual (Page 33)

2. Slide the memory module firmly into the slot at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the
click, remove the memory module and reinstall it.
3. Replace the module cover (see Replacing the Module Cover ).
4. Replace the battery (see Replacing the Battery ).
5. Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system configuration information.
To confirm the amount of memory installed in the computer, click Start ® Help and Support® Dell System Information.
Back to Contents Page
NOTE: If the memory module is not installed properly, the computer may not boot.
1 tab 2 notch
3 memory module connector
CAUTION: If the memory module cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your
computer.