Document history page – Cypress CY62137FV30 User Manual
Page 12
CY62137FV30 MoBL
®
© Cypress Semiconductor Corporation, 2006-2008. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used
for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use
as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support
systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by and subject to worldwide patent protection (United States and foreign),
United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of,
and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress
integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without
the express written permission of Cypress.
Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not
assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where
a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer
assumes all risk of such use and in doing so indemnifies Cypress against all charges.
Use may be limited by and subject to the applicable Cypress software license agreement.
Document Number: 001-07141 Rev. *F
Revised January 2, 2008
Page 12 of 12
MoBL is a registered trademark and More Battery Life is a trademark of Cypress Semiconductor. All product and company names mentioned in this document are the trademarks of their respective holders
.
Document History Page
Document Title: CY62137FV30 MoBL
®
2-Mbit (128K x 16) Static RAM
Document Number: 001-07141
REV.
ECN NO.
Issue
Date
Orig. of
Change
Description of Change
**
449438
See ECN
NXR
New datasheet
*A
464509
See ECN
NXR
Changed the I
SB2(typ)
value from 1.0
μA to 0.5 μA
Changed the I
SB2(max)
value from 4
μA to 2.5 μA
Changed the I
CC(typ)
value from 2 mA to 1.6 mA and I
CC(max)
value from
2.5 mA to 2.25 mA for f=1 MHz test condition
Changed the I
CC(typ)
value from 15 mA to 13 mA and I
CC(max)
value from
20 mA to 18 mA for f=1 MHz test condition
Changed the I
CCDR(typ)
value from 0.7
μA to 0.5 μA and I
CCDR(max)
value from 3
μA to
2.5
μA
*B
566724
See ECN
NXR
Converted from preliminary to final
Changed the I
CC(max)
value from 2.25 mA to 2.5 mA for test condition f=1 MHz
Changed the I
SB2(typ)
value from 0.5
μA to 1 μA
Changed the I
SB2(max)
value from 2.5
μA to 5 μA
Changed the I
CCDR(typ)
value from 0.5
μA to 1 μA and I
CCDR(max)
value from 2.5
μA to
4
μA
*C
869500
See ECN
VKN
Added Automotive-A and Automotive-E information
Updated Ordering Information Table
Added footnote 13 related to t
ACE
*D
901800
See ECN
VKN
Added footnote 9 related to I
SB2
and
I
CCDR
Made footnote 14 applicable to AC parameters from t
ACE
*E
1371124
See ECN VKN/AESA Converted Automotive information from preliminary to final
Changed I
IX
min spec from –1
μA to –4 μA and I
IX
max spec from +1
μA to +4 μA
Changed I
OZ
min spec from –1
μA to –4 μA and I
OZ
max spec from +1
μA to +4 μA
*F
1875374
See ECN VKN/AESA Added -45BVI part in the Ordering Information table