Dell Dimension 8400 - Manual (Page 79)

Removing and Installing Parts
79
NOTICE:
Do not route card cables over or behind the cards. Cables routed over the cards can prevent
the computer cover from closing properly or cause damage to the equipment.
9 Connect any cables that should be attached to the card.
See the documentation for the card for information about the card’s cable connections.
NOTICE:
To connect a network cable, first plug the cable into the network device and then plug it into
the computer.
10 Close the computer cover, reconnect the computer and devices to electrical outlets, and then
turn them on.
11 If you installed a sound card:
a Enter system setup (see page 111), select Audio Controller, and then change the setting
to Off.
b Connect external audio devices to the sound card’s connectors. Do not connect external
audio devices to the microphone, speaker/headphone, or line-in connectors on the back
panel.
alignment bar
alignment guide
retention arm
filler bracket