Dell Dimension 8400 - Manual (Page 18)

18
Setting Up and Using Your Computer
www
.dell.com | support.dell.com
4 To copy the CD or DVD:
•
If you have one CD or DVD drive, ensure that the settings are correct and click Copy. The
computer reads your source CD or DVD and copies it to a temporary folder on your
computer hard drive.
When prompted, insert a blank CD or DVD into the CD or DVD drive and click OK.
• If you have two CD or DVD drives, select the drive into which you have inserted your
source CD or DVD and click Copy. The computer copies the data on the CD or DVD to
the blank CD or DVD.
Once you have finished copying the source CD or DVD, the CD or DVD that you have
created automatically ejects.
Using Blank CD-Rs and CD-RWs
Your CD-RW drive can write to two different types of recording media—CD-Rs and CD-RWs
(including high-speed CD-RWs). Use blank CD-Rs to record music or permanently store data files.
After creating a CD-R, you cannot write to that CD-R again (see the Sonic documentation for more
information). Use blank CD-RWs to write to CDs or to erase, rewrite, or update data on CDs.
Your DVD-writable drive can write to four different types of recording media—CD-Rs, CD-RWs
(including high-speed CD-RWs), DVD+Rs, and DVD+RWs. Blank DVD+Rs can be used to
permanently store large amounts of information. After you create a DVD+R disc, you may not be
able to write to that disc again if the disc is "finalized" or "closed" during the final stage of the disc
creation process. Use blank DVD+RWs if you plan to erase, rewrite, or update information on that
disc later.
Helpful Tips
• Use Microsoft
®
Windows
®
Explorer to drag and drop files to a CD-R or CD-RW only after
you start Sonic RecordNow and open a RecordNow project.
• You must use CD-Rs to burn music CDs that you want to play in regular stereos. CD-RWs do
not play in most home or car stereos.
• You cannot create audio DVDs with Sonic RecordNow.
• Music MP3 files can be played only on MP3 players or on computers that have MP3 software
installed.
• Do not burn a blank CD-R or CD-RW to its maximum capacity; for example, do not copy a
650-MB file to a 650-MB blank CD. The CD-RW drive needs 1 or 2 MB of the blank CD to
finalize the recording.
• Use a blank CD-RW to practice CD recording until you are familiar with CD recording
techniques. If you make a mistake, you can erase the data on the CD-RW and try again. You
can also use blank CD-RWs to test music file projects before you record the project
permanently to a blank CD-R.
See the Sonic support website at support.sonic.com for additional information.