Dell Dimension 8400 - Manual (Page 12)

12
Setting Up and Using Your Computer
www
.dell.com | support.dell.com
Connecting a Parallel Printer
1 Complete the operating system setup, if you have not already done so.
2 Turn off the computer (see page 59).
NOTICE:
For best results, use a 3-m (10-ft) or shorter parallel cable.
3 Attach the parallel printer cable to the parallel connector on the computer and tighten the
two screws. Attach the cable to the connector on the printer and snap the two clips into the
two notches.
USB printer cable
USB connector on computer
USB connector
on printer