beautypg.com

Transferring information to a new computer – Dell Vostro 200 (Mid 2007) User Manual

Page 47

background image

Setting Up and Using Your Computer

47

Rebuilding a Degraded RAID 1 Volume

If your computer does not have a spare hard drive, and the computer has
reported a degraded RAID 1 volume, you can manually rebuild the
computer’s redundancy mirror to a new hard drive by performing the
following steps:

1 In Windows XP, click Start→ All Programs→ Intel

®

Matrix Storage

Manager

→ Intel Matrix Storage Console to launch the Intel

®

Storage

Utility.

In Windows Vista, click Start

→ Programs→ Intel

®

Matrix Storage

Manager

→ Intel Matrix Storage Manager to launch the Intel

®

Storage

Utility.

2 Right-click the available hard drive to which you want to rebuild the

RAID 1 volume, and click Rebuild to this Disk.

NOTE:

You can use your computer while the computer is rebuilding the RAID 1

volume.

Transferring Information to a New Computer

You can use your operating system "wizards" to help you transfer files and
other data from one computer to another—for example, from an old
computer to a new computer. For instructions, see the following section that
corresponds to the operating system your computer is running.

Transferring Information using Windows XP

The Microsoft

Windows XP operating system provides the Files and Settings

Transfer Wizard to move data from a source computer to a new computer.
You can transfer data, such as:

E-mail messages

Toolbar settings

Window sizes

Internet bookmarks

You can transfer the data to the new computer over a network or serial
connection, or you can store it on removable media, such as a writable CD,
for transfer to the new computer.