Dell Vostro 200 (Mid 2007) - Manual (Page 136)

136
Removing and Installing Parts
Replacing the FlexBay Drive Panel Insert
1 Slide the drive panel insert tab into the slot on the bezel.
2 Push the panel insert towards the bezel till it snaps in place.
NOTE:
To comply with FCC regulations, it is recommended that you replace the
drive panel insert whenever the floppy drive is removed from the computer.
Media Card Reader
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
Removing a Media Card Reader
1 Follow the procedures in "Before You Begin" on page 99.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 101).
1 drive panel insert (optional) 2 slot
1
2