Camera (optional), Removing the camera, Replacing the camera – Dell Studio 1435 (Late 2008) User Manual
Page 7
Back to Contents Page
Camera (Optional)
Dell Studio™ 1435 Service Manual
Removing the Camera
1.
Follow the instructions in
Before You Begin
.
2.
Follow the instructions in
Removing the Display Assembly
.
3.
Remove the display bezel (see
Display Bezel
).
4.
Remove the two screws securing the camera board.
5.
Release the securing tabs and disconnect the camera cable from the camera board connector.
6.
Remove the camera board.
Replacing the Camera
1.
Align the camera board over the screw holes.
2.
Replace the two screws that secure the camera board to the display cover.
3.
Connect the camera cable to the connector on the camera board.
4.
Replace the display bezel (see
Replacing the Display Bezel
).
5.
Follow the instructions in
Replacing the Display Assembly
.
Back to Contents Page
CAUTION:
Before working inside your computer, follow the safety instructions that shipped with your computer.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
1
screw (2)
2
camera
3
camera cable pull-tab