beautypg.com

Regulatory notices for wireless option, Operational information, Regulatory information – Dell 5310n Mono Laser Printer User Manual

Page 147: Wireless interoperability, Safety, Usa - federal communications commission (fcc)

background image

 

 

Regulatory Notices for Wireless Option

Operational Information

Wireless interoperability

 

The Dell 5210 / 5310 Wireless Option is designed to be interoperable with any wireless LAN product that is based on direct sequence spread spectrum (DSSS)
radio technology and orthogonal frequency division multiplexing (OFDM) and to comply with the following standards:

 

l

IEEE 802.11b-1999 Standard on 2.4 GHz Wireless LAN

 

l

IEEE 802.11g Standard on 2.4 GHz Wireless LAN

 

l

Wireless Fidelity (Wi-Fi) certification, as defined by the WECA (Wireless Ether-net Compatibility Alliance)

Safety

 

The Dell 5210 / 5310 Wireless Option, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this device,
however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The Dell 5210 / 5310 Wireless Option operates
within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the
scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research
literature. In some sit-uations or environments, the use of the Dell 5210 / 5310 Wireless Option may be restricted by the proprietor of the building or
responsible repre-sentatives of the applicable organization. Examples of such situations include the following:

Using the Dell 5210 / 5310 Wireless Option in any other environment where the risk of interference with other devices or services is perceived or
identified as being harmful.

 

If you are uncertain of the policy that applies to the use of wireless devices in a specific organization or environment (an airport, for example), you are encour-
aged to ask for authorization to use the Dell 5210 / 5310 Wireless Option before you turn it on.

Regulatory Information

 

The Dell 5210 / 5310 Wireless Option must be installed and used in strict accordance with the manufacturer's instructions as described in the user
documentation that comes with the product. For country-specific approvals, see

Radio Approvals

. Dell Inc is not responsible for any radio or television

interference caused by unauthorized modification of the devices included with this Dell 5210 / 5310 Wireless Option card, or the substitution or attachment of
connecting cables and equipment other than that specified by Dell Inc. The correction of interference caused by such unauthorized modification, sub-stitution
or attachment is the responsibility of the user. Dell Inc and its authorized resellers or distributors are not liable for any damage or violation of government
regulations that may arise from the user failing to comply with these guidelines.

USA - Federal Communications Commission (FCC)

FCC Radiation Exposure Statement

 

WARNING: The radiated output power of the Dell 5210 / 5310 Wireless Option is far below the FCC radio frequency exposure limits. Nevertheless, Dell 5210 /
5310 Wireless Option should be used in such a manner that the potential for human contact during normal operation is min-imized. To avoid the possibility of
exceeding the FCC radio frequency exposure limits, you should keep a distance of at least 20 cm between you (or any other person in the vicinity) and the
antenna that is built into the printer. To determine the location of the antenna within your printer, check the information posted on the general Dell support
site at

http://support.dell.com

.

 

For SAR purposes,this is considered a mobile device and calculations have been performed and the device has been shown to be compliant with the FCC RF
exposure limits under mobile exposure conditions.

Radio Frequency Interference Requirements

 

WARNING: Dell 5210 / 5310 Wireless Option
This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz fre-quency range. The FCC requires this product to be used indoors for
the frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.