Dell Managed PDU LED User Manual
User’s guide
Table of contents
Document Outline
- Contents
- Introduction
- Rack PDU Front Panel
- Command Line Interface
- About the Command Line Interface
- Logging on to the Command Line Interface
- About the Main Screen
- Using the Command Line Interface
- Command Syntax
- Command Response Codes
- Network Management Card Command Descriptions
- Device Command Descriptions
- devLowLoad
- devNearOver
- devOverLoad
- devReading
- devStartDly
- humLow
- humMin
- humReading
- inNormal
- inReading
- olAssignUsr
- olCancelCmd
- olDlyOff
- olDlyOn
- olDlyReboot
- olGroups
- olLowLoad
- olName
- olNearOver
- olOff
- olOffDelay
- olOn
- olOnDelay
- olOverLoad
- olRbootTime
- olReading
- olReboot
- olStatus
- olUnasgnUsr
- phLowLoad
- phNearOver
- phOverLoad
- phReading
- phRestrictn
- prodInfo
- sensorName
- tempHigh
- tempMax
- tempReading
- userAdd
- userDelete
- userList
- userPasswd
- whoami
- Web Interface
- Device Management
- About the Device Manager Tab
- Viewing the load status and peak load
- Configuring Load Thresholds
- Configuring the Name and Location of the Rack PDU
- Setting the Coldstart Delay
- Resetting Peak Load and kWh
- Configure and Control Outlet Groups
- Outlet group terminology
- Purpose and benefits of outlet groups
- System requirements for outlet groups
- Rules for configuring outlet groups
- Enable outlet groups
- Create a local outlet group
- Create multiple global outlet groups
- Edit or delete an outlet group
- Typical outlet group configurations
- Verify your setup and configuration for global outlet groups
- Outlet Settings for Outlets and Outlet Groups
- Scheduling Outlet Actions
- Outlet Manager Menu
- Environment
- Logs
- Administration: Security
- Administration: Notification
- Administration: Network Features
- Administration: General Options
- How to Export Configuration Settings
- File Transfers
- Troubleshooting
- Appendix A: List of Supported Commands
- Appendix B: Security Handbook
- Content and Purpose of This Appendix
- Security Features
- Authentication
- Encryption
- Creating and Installing Digital Certificates
- Firewalls
- Using the Rack PDU Security Wizard
- Create a Root Certificate and Server Certificates
- Create a Server Certificate and Signing Request
- Create an SSH Host Key
- Command Line Interface Access and Security
- Telnet and Secure Shell (SSH)
- Web Interface Access and Security: HTTP and HTTPS (with SSL)
- Supported RADIUS Functions and Servers
- Configure the Rack PDU
- Configure the RADIUS Server
- Index