Dell Precision R5500 (Early 2011) - Manual (Page 27)

10
Control Panel
Removing the Control Panel
CAUTION: Two different Torx drivers are needed for the control panel disassembly/reassembly, a T10 and T8.
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the front bezel .
3. Remove the cover .
4. Remove the cooling shroud .
5. Remove the optical drive .
6. Remove the hard drive carrier .
7. Remove the hard-drive assembly .
8. Remove the SAS Backplane .
9. Remove the power supply .
10. Locate and remove the torx screw securing the control panel.
11. Remove the control panel cables.
Related Links
Installing the Control Panel
27