Remove the hard-disk drive bracket – Dell Precision 220 User Manual

Page 11

Hard-Disk Drive Removal

To remove a hard-disk drive from the internally accessible drive bracket, perform the following steps.

1. Remove the

2. Disconnect the DC power cable and data cable from the drive.

3. Remove the screw holding the hard-disk drive bracket to the drive bay.

4. Rotate the drive bracket upward to disengage it from the latch on the drive bay, slide it to the left, and lift it out of the chassis. (see

Figure 15. Hard-Disk Drive Bracket Removal

Figure 16. Hard-Disk Drive Removal

1 Retaining tabs (2)

2 Drive bracket

3 Screws (4)

CAUTION: Before you remove the computer cover, see "

1 Screw

2 Hooks (3)

3 Drive bracket

4 Latch on drive bay