Dell Intel PRO Family of Adapters - Manual (Page 56)

Instances of IANet_DiagResult display result data for a particular test run on a particular adapter. Instances of this class
correspond identically to instances of IANet_DiagTest and IANet_DiagSetting.
Instances
Instances of IANet_DiagResult correspond to results of a particular test run on a specific adapter. The format for the key is
the same as IANet_DiagTest and IANet_DiagSetting. The instance can store any arbitrary test results as any data, which does
not fit the defined properties, can be placed into the TestResults Array property. Any time a new test is run on an adapter, the
new instance overwrites the existing instance of test results corresponding to that adapter and test combination.
Creating Instances
You cannot create instances of this class.
Deleting Instances
You cannot delete instances of this class.
Modifying Properties
You cannot modify instances of this class.
Associations
An instance of IANet_DiagResultForTest associates an IANet_DiagTest with an IANet_DiagnosticResult instance.
Unsupported Properties
The following properties are not supported by NCS:
EstimatedTimeOfPerforming
HaltOnError
OtherStateDescription
ReportSoftErrors
TestWarningLevel
Methods
None
Class Hierarchy
For CimV2. Unused properties and methods not shown.
CIM_DiagnosticResult:
Keys
DiagnosticCreationClassName (string)
DiagnosticName (string)
ExecutionID (string)
DiagSystemCreationClassName (string)
DiagSystemName (string)
Properties
TimeStamp (string)
IsPackage (Boolean)
TestStartTime (datetime)
TestCompletionTime (datetime)
TestState (uint16)
TestResults (string)
PercentComplete (uint8)
IANet_DiagResult
Back to Top
Registry Entries
The following entries are entered into the registry during installation under
HKLM\Software\Intel\NETWORK_SERVICES\NCS\NcsDiag. These keys and values control the execution of the
diagnostic tests and are defined below.
The following table contains the values in the key, their type, and a brief explanation of their usage:
Value Type Default Usage
Check Time REG_DWORD 2 seconds Duration of time period between checks for completion of sender or
56