Dell Intel PRO Family of Adapters - Manual (Page 54)

The referenced parameter ManagedSystemElement, combined with this object’s object path combine to reference
instances of DiagnosticResultForMSE, which will be deleted. Also, all references of DiagnosticResult objects referenced
by DiagnosticResultForMSE will be deleted. Also, all instances of DiagnosticResultForTest, which refer to the deleted
DiagnosticResult objects, will be deleted. Finally, the string array Output parameter ResultsNotCleared will list the keys
of the DiagnosticResults, which could not be cleared.
Class Hierarchy
For CimV2. Unused properties and methods not shown.
CIM_ManagedElement:
Caption
Description
CIM_ManagedSystemElement:
Install Date
Name
Status
CIM_LogicalElement
CIM_Service:
Key
Name (string)
Properties
Caption (string)
CreationClassName (string)
Description (string)
Started (boolean)
StartMode (string)
Status (string)
SystemCreationClass (string)
SystemName (string)
CIM_DiagnosticTest:
Properties
Characteristics (uint16 array)
IsInUse (Boolean)
ResourcesUsed (uint16 array)
Methods
RunTest
ClearResults
DiscontinueTest
Executing RunTest, and Other Methods in WbemTest
The RunTest method from the MOF file is as follows:
uint32
RunTest([IN] CIM_ManagedSystemElement ref SystemElement,
[IN] CIM_DiagnosticSetting ref Setting,
[OUT] CIM_DiagnosticResult ref Result);
The first two parameters are In parameters. You must get the object path of both objects referenced. You must also get the
object path of the IANet_DiagTest object, which is exporting the RunTest object.
1. From the main WBEM test dialog box, click Connect.
2. Enter the appropriate Server\Namespace. Namespaces IntelNCS and CimV2 are supported.
3. Click the Enum Instances button of WBEM test and enter IANet_DiagTest.
4. Double-click the instance of IANet_DiagTest. The name will be in the form X@[AdapterGUID}, where X is the test name
and AdapterGUID will be the Adapter Name, same as the Name key of the IANet_EthernetAdapter.
5. The following is an example of the object path retrieved:
\\MYCOMPUTER\root\Cimv2:IANet_DiagTest.Name="1@{4A0CDABE-F6C3-45D0-B60D-F6E7BAFA2C2C}"
6. Save the object path.
7. Click the Enum Instances button of WBEM test and enter IANet_EthernetAdapter.
8. Double-click on the adapter to be tested.
9. The following is an example of the object path retrieved:
\\MYCOMPUTER\root\cimv2:IANet_EthernetAdapter.DeviceID="{4A0CDABE -F6C3-45D0-B60D-F6E7BAFA2C2C}"
10. Save the object path.
11. Click the Enum Instances button of WBEM test and enter IANet_DiagSetting.
12. Double-click on the setting that represents the adapter/test combination.
13. The following is an example of the object path retrieved:
\\MYCOMPUTER\root\cimv2:IANet_DiagSetting.SettingID="1@{4A0CDABE-F6C3-45D0-B60D-F6E7BAFA2C2C}"
14. Save the object path.
15. From the main WBEM test dialog box, click Execute Method.
54