Led cover, Removing the led cover, Replacing the led cover – Dell Precision M2400 (Mid 2008) User Manual
Page 65
Back to Contents Page
LED Cover
Dell™ Latitude™ E6400 and E6400 ATG and
Mobile Workstation Precision™ M2400 Service Manual
Removing the LED Cover
1.
Follow the procedures in
Before Working on Your Computer
.
2.
Locate the tabs in the battery bay that secure the LED cover to the top of the computer.
3.
Using a plastic scribe, gently push on the tabs to release the LED cover.
4.
Turn the computer topside up, then open the display and remove the LED cover.
Replacing the LED Cover
1.
Working at an angle, snap the LED cover into place one tab at a time.
2.
Follow the procedures in
After Working on Your Computer
.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
1 tabs (3) 2 battery bay
1 LED cover
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.