Dell Precision M2400 (Mid 2008) - Manual (Page 44)

Replacing the Latch Hook Assembly
1. Angle the latch hook into the display cover.
2. Replace the M2.5 x 5-mm screw that secures the latch hook assembly to the display cover.
3. Replace the display bezel (see Replacing the Display Bezel (E6400 and M2400) or Replacing the Display Bezel (E6400 ATG) ).
4. Replace the display assembly (see Replacing the Display Assembly (E6400 and M2400) or Replacing the Display Assembly (E6400 ATG) ).
5. Replace the hinge covers (see Replacing the Hinge Covers ).
6. Replace the bottom of the base assembly (see Replacing the Bottom of the Base Assembly ).
7. Follow the procedures in After Working on Your Computer .
Removing the Display Cover
1. Follow the instructions in Before Working on Your Computer .
2. Remove the bottom of the base assembly (see Removing the Bottom of the Base Assembly ).
3. Remove the hinge covers (see Removing the Hinge Covers ).
4. Remove the display assembly (see Removing the Display Assembly (E6400 and M2400) or Removing the Display Assembly (E6400 ATG) ).
5. Remove the display bezel (see Removing the Display Bezel (E6400 and M2400) or Removing the Display Bezel (E6400 ATG) ).
6. Remove the display panel from the display cover (see Removing the CCFL Display Panel and Brackets (E6400 and M2400) , Removing the LED Display
Panel and Brackets (E6400 and M2400) or Removing the Display Panel and Brackets (E6400 ATG) ).
Replacing the Display Cover
1 M2.5 x 5-mm screw 2 latch hook assembly
3 display cover
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
NOTE: It is not necessary to remove the brackets from the display panels in the next step.