Processor module, Removing the processor module – Dell Precision M2400 (Mid 2008) User Manual
Page 19
Back to Contents Page
Processor Module
Dell™ Latitude™ E6400 and E6400 ATG and
Mobile Workstation Precision™ M2400 Service Manual
Replacing the Processor Module
Removing the Processor Module
1.
Follow the instructions in
Before Working on Your Computer
.
2.
Remove the bottom of the computer (see
Removing the Bottom of the Base Assembly
).
3.
Remove the processor heatsink assembly (see
Removing the Processor Heatsink Assembly
).
4.
To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1 processor module
NOTICE:
To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.
1 ZIF socket 2 ZIF-socket cam screw
NOTICE:
To ensure maximum cooling for the processor, do not touch the heat transfer areas on the processor heatsink assembly. The oils in your
skin can reduce the heat transfer capability of the thermal pads.