Internal card with bluetooth® wireless technology, Removing the card, Replacing the card – Dell Vostro 1200 (Early 2009) User Manual
Page 6
Back to Contents Page
Internal Card With Bluetooth® Wireless Technology
Dell™ Vostro™ 1200 Service Manual
Removing the Card
If you ordered an internal card with Bluetooth wireless technology with your computer, it is already installed.
1.
Follow the procedures in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the screw on the card cover, and remove the cover.
4.
Remove the card out of the compartment.
5.
Disconnect the cable from the card connector.
Replacing the Card
1.
Connect the cable to the card connector.
2.
Place the card into the compartment.
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of
the computer.
1 card
2 connector
3 compartment 4 cover
5 screw
NOTICE:
Be careful when removing the card to avoid damaging the card, card cable, or surrounding components.
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching a connector on the back panel of the
computer.