Mini cards, Removing a wlan card – Dell Vostro 1200 (Early 2009) User Manual
Page 27
Back to Contents Page
Mini Cards
Dell™ Vostro™ 1200 Service Manual
Removing a Flash Cache Memory Card
Replacing a Flash Cache Memory Card
If you ordered a WLAN and/or a flash cache memory (FCM) card with your computer, these cards will already be installed.
1.
Follow the procedures in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Turn the computer upside-down and remove the one M2.5x5-mm screw and nine M2.5x8-mm screws.
4.
Insert a plastic scribe into the notch on the component cover, and lift to remove the cover.
5.
Ground yourself by touching one of the metal connectors on the back of the computer.
Removing a WLAN Card
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE:
To prevent damage to the system board, remove the battery before you service the computer.
1 M2.5x8-mm component cover screws (9)
2 M2.5x5-mm screw
3
component cover
NOTE:
If you leave the area, ground yourself again when you return to the computer.
NOTE:
Depending on the type of card, not all cables may be in use.