Palm rest, Removing the palm rest – Dell Vostro 1200 (Early 2009) User Manual
Page 33
Back to Contents Page
Palm Rest
Dell™ Vostro™ 1200 Service Manual
Removing the Palm Rest
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the hinge cover (see
Removing the Hinge Cover
).
4.
Remove the keyboard (see
Removing the Keyboard
).
5.
Remove the display assembly (see
Removing the Display Assembly
).
6.
Remove the fan (see
Removing the Fan
).
7.
Remove the optical drive (see
Removing the Optical Drive
).
8.
Remove the hard drive (see
Removing the Hard Drive
).
9.
Remove the five M2.5x8-mm screws and the two M2.5x3-mm screws on the bottom of the computer.
10.
Turn the computer top-side up and remove the M2.5x5-mm screw on the palm rest.
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
M2.5x8-mm screws (5)
2
M2.5x3-mm screws (2)