Dell Vostro 1200 (Early 2009) - Manual (Page 29)

6. Replace the battery (see Replacing the Battery ).
Removing a Flash Cache Memory Card
1. Ground yourself by touching one of the metal connectors on the back of the computer.
2. Disconnect the cables from the flash cache memory (FCM) card.
3. Remove the screws.
4. Slide the card at a 45-degree angle out of its connector.
Replacing a Flash Cache Memory Card
1. Move any cables out of the way to make space for the FCM card.
2. Align the card with the connector at a 45-degree angle, and press the card into the connector until it clicks.
3. Replace the screws on the FCM card.
4. Connect the cables to the FCM card.
5. Replace the cover.
6. Replace the Battery (see Removing the Battery ).
Back to Contents Page
NOTE: If you leave the area, ground yourself again when you return to the computer.
NOTE: Depending on the type of card, not all cables may be in use.
1 FCM card 2 connector
3 screws (2)
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.
NOTICE: To avoid damaging the card, never place cables on top of or under the card.
NOTE: The card may have two or three connectors, depending on the type of card you ordered.
NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your card.